Home › Roofing Cost Calculator
Calculate your roofing cost
Your estimated roofing cost
Rates: Angi national cost data (updated Oct 2026, 32,999 projects) cross-checked with HomeGuide and Modernize 2026 guides. Preliminary estimate only — see the disclaimer below.
How this calculator works
This is the simplified version of our replacement cost calculator: one formula, no extras.
The installed rates are the published national bands on which Angi, HomeGuide and Modernize agree — $3–$5 per sq ft for 3-tab shingles up to $10–$30 for slate. The typical figure is always the band's midpoint. Because this quick tool skips tear-off and waste, use it for early budgeting and for comparing materials against each other; switch to the replacement calculator when you are comparing actual quotes for a full tear-off job.
Worked example
A 1,700 sq ft roof in architectural shingles ($4–$6 per sq ft): low 1,700 × $4 = $6,800, typical 1,700 × $5 = $8,500, high 1,700 × $6 = $10,200. In contractor units that is $680–$1,020 per square.
Roofing cost per square foot by material
Installed prices (materials + labor) per square foot of roof area, and per roofing square (100 sq ft):
| Material | Per sq ft | Per square (100 sq ft) | Typical lifespan |
|---|---|---|---|
| Asphalt shingles — 3-tab | $3 – $5 | $300 – $500 | 15–20 years |
| Asphalt shingles — architectural | $4 – $6 | $400 – $600 | 25–30 years |
| Metal roofing | $5 – $16 | $500 – $1600 | 40–70 years |
| Concrete / clay tile | $7 – $20 | $700 – $2000 | 50–100 years |
| Wood shakes | $5 – $15 | $500 – $1500 | 30–50 years |
| Slate | $10 – $30 | $1000 – $3000 | 75–200 years |
Angi's national average across materials is $4–$11 per sq ft installed. Steep pitches, multiple stories and complex roofs price toward the top of each band because they slow the crew down and need more safety equipment.
What this quick estimate leaves out
- Tear-off: removing the old roof adds roughly $1.00–$2.00 per sq ft on a replacement.
- Waste: materials are ordered 10–15% over the measured area for cuts — that affects material cost, not the installed rate itself.
- Deck repairs: rotted sheathing is replaced per sheet and only shows itself after tear-off.
- Regional labor: published bands are national; coastal-metro labor can run 20–40% above them, rural areas below.
None of that makes the quick number useless — it makes it a floor for planning. A quote that lands inside the band is normal; one far below it usually means scope is missing, and one far above it needs itemizing.
Frequently asked questions
How much does a new roof cost per square foot?
Across all materials, Angi's national data averages $4–$11 per sq ft installed. By material: 3-tab shingles $3–$5, architectural shingles $4–$6, metal $5–$16, tile $7–$20, wood shakes $5–$15 and slate $10–$30 per sq ft.
What is a roofing square?
A square is 100 square feet of roof area — the unit roofers price and order in. A 1,700 sq ft roof is 17 squares. Multiply a per-square quote by your squares to compare it with the per-sq-ft figures here.
Why does this calculator differ from the replacement cost calculator?
This is the quick version: surface × rate, nothing else. The replacement cost calculator adds the two items a real replacement almost always includes — tear-off of the old roof ($1.00–$2.00/sq ft) and a waste allowance — so its figures run higher and closer to a full quote.
Does roof pitch really change the price?
Twice over. Pitch increases the surface area itself (a 12/12 roof has about 41% more surface than its footprint), and steep roofs are slower and riskier to work on, which pushes labor toward the top of the rate band.
How can I lower my roofing cost?
The honest levers: choose architectural shingles over premium materials, schedule in the contractor's off-season, get three itemized quotes, and fix decking problems before they spread. Skipping tear-off by roofing over old shingles saves money once but shortens the new roof's life and can void warranties.
Sources & data
Cost rates: Angi, "How Much Does Roof Replacement Cost?" — national data updated Oct 2026, based on 32,999 reported projects (average $9,610; typical range $5,903–$13,378; $4–$11 per sq ft installed across materials). Cross-checked against HomeGuide's 2026 roof replacement cost guide and Modernize's 2026 roof cost data; the material bands used here are the ranges on which these sources agree.
Data retrieved: 17 Nov 2026. Rates are reviewed as sources publish updates.
Related calculators & guides
Keep going with the tools and guides homeowners use alongside this one:
Roof Replacement Cost Calculator
Low, typical and high replacement estimates from your roof size, pitch and material — the site's pillar tool.
Roof Area Calculator
True roof square footage and roofing squares from footprint and pitch.
Metal Roof Cost Calculator
Corrugated, metal shingle and standing seam prices, plus a panel count for your eave.
Roof Replacement Cost: 2026 Pricing Guide
The $9,610 national average, cost by material and home size, and what moves a quote.
Roof Shingle Calculator
Squares, bundles and underlayment rolls for your roof, with a cost range.