US Roof Calculator

Roof Replacement Cost Calculator

Find out what a new roof is likely to cost on your home — before you call a contractor. Enter your roof size, pitch and material, and get a low, typical and high estimate built from published US cost data, with the full calculation shown openly below.

Home › Roof Replacement Cost Calculator

Calculate your estimate

Your estimated roof replacement cost

Low estimate
—
Typical
—
High estimate
—
    Assumptions in this estimate

      Rates: Angi national cost data (updated Oct 2026, 32,999 projects) cross-checked with HomeGuide and Modernize 2026 guides. Preliminary estimate only — see the disclaimer below.

      How the estimate is calculated

      Nothing here is a black box. The calculator uses one transparent formula, and every number in it is shown on this page:

      Roof surface area = footprint × pitch multiplier (house-size mode only) Adjusted area = roof surface area × (1 + waste allowance) Cost = adjusted area × installed rate per sq ft (+ $1.00–$2.00 per sq ft if tear-off is included)

      Why the pitch multiplier?

      A sloped roof has more surface than the floor plan underneath it. If you enter your house size, we first divide by the number of stories to get the building footprint, then multiply by the standard pitch factor for your slope (6/12 pitch = ×1.12, 12/12 = ×1.41). If you enter your actual roof area directly, no multiplier is applied — your figure is already the true surface.

      Why a range instead of one number?

      Published cost data is reported as a band, not a single price, because real quotes move with roof complexity, local labor rates and material grade. We show the same honesty: the low figure uses the bottom of the band, the typical figure the midpoint, and the high figure the top.

      Roof replacement cost by material

      Installed prices per square foot of roof area (materials + labor), from the published sources listed at the bottom of this page:

      MaterialInstalled cost / sq ftTypical lifespan
      Asphalt shingles — 3-tab$3 – $515–20 years
      Asphalt shingles — architectural$4 – $625–30 years
      Metal roofing$5 – $1640–70 years
      Concrete / clay tile$7 – $2050–100 years
      Wood shakes$5 – $1530–50 years
      Slate$10 – $3075–200 years

      For context, Angi's national average for a full replacement is $9,610, with most homeowners paying between $5,903 and $13,378. Tear-off of one existing layer typically adds $1.00–$2.00 per sq ft; a second layer, deck repairs, or structural work cost extra and are not included here.

      Common mistakes when estimating a roof replacement

      1. Using the house's floor area as the roof area

      On a two-story home the roof covers roughly half the total floor area — but pitch then adds surface back. Skipping either step can swing an estimate by thousands of dollars. That is exactly the conversion this calculator does for you in house-size mode.

      2. Forgetting the tear-off

      Most replacements require removing the old roof first. Leaving tear-off out understates a typical job by roughly $1,700–$3,400 on an average roof.

      3. Ignoring waste

      Shingles and panels are cut to fit valleys, hips and edges. A 10% waste allowance is standard on a typical roof and 15% on a complex one; ordering or budgeting at exactly the measured area almost always falls short.

      4. Comparing quotes per "square" without checking what is included

      Roofers price by the square (100 sq ft). Two quotes at the same price per square can differ by thousands once tear-off, underlayment, flashing and disposal are itemized — always compare the full scope, not the headline rate.

      Frequently asked questions

      How much does it cost to replace a roof in 2026?

      Angi's national data (updated Oct 2026, based on 32,999 projects) puts the average at $9,610, with most homeowners paying between $5,903 and $13,378 — roughly $4 to $11 per square foot installed across common materials. Your own figure depends mainly on roof size, pitch and material, which is what the calculator above works out.

      How do I measure my roof area?

      The most accurate homeowner method: take your home's footprint (total floor area ÷ number of stories) and multiply by the pitch factor for your slope — for example ×1.12 for a 6/12 pitch. Add 10% for waste. Alternatively, many past quotes, appraisals and satellite roof reports state the roof area directly; if you have that figure, enter it in "I know my roof area" mode.

      Does this estimate include removing the old roof?

      Only if the tear-off toggle is on (it is by default). It adds an assumed $1.00–$2.00 per square foot, the typical published range for removing one existing layer including disposal. Removing two layers, or repairing damaged decking underneath, costs more and is not included.

      Why is metal roofing's price range so wide?

      Metal covers everything from exposed-fastener panels at the low end to standing-seam systems at the high end, and published guides price the full family at $5–$16 per square foot installed. If you are quoted standing seam specifically, expect the upper half of that band.

      Can I rely on this estimate instead of getting quotes?

      No — use it to plan a budget and to judge whether the quotes you receive are in a fair range. Only an on-site (or satellite-measured) contractor quote can price your roof's actual condition, decking, flashing and local labor rates.

      How often should a roof be replaced?

      It depends on material: roughly 15–20 years for 3-tab shingles, 25–30 for architectural shingles, 40–70 for metal, and 50+ for tile and slate. Curling or missing shingles, granules in gutters, and recurring leaks are the usual signs that replacement — not another repair — is due.

      Sources & data

      Cost rates: Angi, "How Much Does Roof Replacement Cost?" — national data updated Oct 2026, based on 32,999 reported projects (average $9,610; typical range $5,903–$13,378; $4–$11 per sq ft installed across materials). Cross-checked against HomeGuide's 2026 roof replacement cost guide and Modernize's 2026 roof cost data (material bands used here are the ranges on which these sources agree).

      Pitch multipliers: standard roofing pitch factors (rise-over-run geometry: √(1 + (rise/12)²)), as published in roofing measurement references.

      Data retrieved: 17 Nov 2026. Rates will be reviewed as sources publish updates.

      Disclaimer: This page gives a preliminary estimate, not a contractor quote. Figures are based on national published cost ranges and standard geometry, with the assumptions shown on the page. Your actual price or measurement will vary with location, roof complexity and condition, material grade, and contractor. Always obtain written quotes and verify critical measurements before buying materials.

      Related calculators & guides

      Keep going with the tools and guides homeowners use alongside this one:

      Roofing Cost Calculator

      A quick general roofing cost estimate per square foot and in total, for any material.

      Roof Replacement Cost: 2026 Pricing Guide

      The $9,610 national average, cost by material and home size, and what moves a quote.

      Metal Roof Cost Calculator

      Corrugated, metal shingle and standing seam prices, plus a panel count for your eave.

      Roof Area Calculator

      True roof square footage and roofing squares from footprint and pitch.

      Roof Repair Cost Calculator

      Published price ranges for leak repairs, shingle replacement, flashing and partial re-roofs.