US Roof Calculator

Roof Sheathing Calculator: OSB & Plywood Sheets

Roof decking comes in 4×8 sheets, so every sheathing question is an area question with rounding. Enter your true roof area, pick a waste allowance for your roof's shape, and get the sheet count — always rounded up — plus a budget cost range at published retail sheet prices.

Home › Roof Sheathing Calculator

Calculate your sheathing

Your sheathing figures

Sheets needed
—
Area covered
—
Sheet cost range
—
    Assumptions in this estimate

      Sheet prices: published retail band of $15–$35 per 4×8 sheet for common OSB/plywood thicknesses (2026). Lumber prices move — treat the range as a budget band.

      How the sheet count works

      Sheets = roof area × (1 + waste) ÷ 32 sq ft per sheet, rounded UP

      Worked example. A 1,600 sq ft roof with no waste: 1,600 ÷ 32 = exactly 50 sheets, costing 50 × $15–$35 = $750–$1,750. At the typical 10% allowance the same roof needs 55 sheets — five extra sheets is the real price of hips, valleys and saw kerfs, and running short mid-job costs more than they do.

      Sheets are laid with their 8 ft dimension across the rafters or trusses, staggered so vertical joints never line up, with a small expansion gap (about ⅛ inch, often set by the H-clips between sheets). The count above assumes that standard layout; very cut-up roofs waste more, which is what the 15% setting is for.

      OSB or plywood?

      Both are code-approved roof decks. OSB is cheaper, consistently flat, and the default on most new homes; plywood costs more, handles wetting-and-drying during construction better, and holds nails slightly better at panel edges. Thickness follows span and load: 7/16″ is typical at 24″ truss spacing, 15/32″ or 5/8″ for wider spans, tile roofs or high snow loads — your truss or rafter spacing and local code decide, not preference.

      Re-decking vs deck repair during a re-roof

      This calculator decks a whole roof — new construction, or a full re-deck. Most re-roofs are not that: the existing deck stays, and only damaged sheets are replaced. Budget for that separately: roofers typically replace a handful of sheets at tear-off, priced per sheet installed, and a deck that has leaked for years can need far more. If you are quoted a full re-deck on a re-roof, ask why — sometimes it is honest (spaced plank decking under old wood shingles must be sheeted over for modern shingles), and sometimes it is padding.

      One more line item hides here: the old deck's fastening. In hurricane regions, re-nailing the existing deck to current code during a re-roof is often required and can earn an insurance discount — it costs labor, not sheets, so it never appears in a sheet count.

      Frequently asked questions

      How many sheets of plywood do I need for my roof?

      Divide your roof area by 32 (the sq ft in a 4×8 sheet), add your waste percentage first, and round up. A 1,600 sq ft roof at 10% waste: 1,760 ÷ 32 = 55 sheets.

      How many square feet is one sheet of roof sheathing?

      32 square feet — every standard sheet is 4 ft × 8 ft regardless of thickness. One sheet therefore covers about a third of a roofing square.

      What thickness of sheathing does a roof need?

      Typically 7/16″ at 24″ rafter/truss spacing for shingle roofs, stepping up to 15/32″ or 5/8″ for wider spans, heavy coverings like tile, or high snow loads. Your local code span tables govern — check before ordering.

      Is OSB or plywood better for a roof deck?

      Both meet code. OSB is cheaper and flatter; plywood tolerates construction weather better and costs more. In persistently wet climates and for tile underlayment, many roofers prefer plywood; for standard shingle work OSB is the common default.

      Why does the cost range run $15–$35 per sheet?

      That band spans common products (7/16″ OSB at the low end, 5/8″ plywood at the high end) at typical 2026 retail. Lumber is one of the most volatile building prices — the range is a budgeting tool, and the yard's quote on the day is the real number.

      Sources & data

      Sheet prices: published US retail band for 4×8 OSB and plywood sheathing, 2026 ($15–$35 per sheet across common thicknesses). Coverage: 4 ft × 8 ft = 32 sq ft per sheet, manufacturer standard. Data retrieved: 17 Nov 2026.

      Disclaimer: This page gives a preliminary estimate, not a contractor quote. Figures are based on national published cost ranges and standard geometry, with the assumptions shown on the page. Your actual price or measurement will vary with location, roof complexity and condition, material grade, and contractor. Always obtain written quotes and verify critical measurements before buying materials.

      Related calculators & guides

      Keep going with the tools and guides homeowners use alongside this one:

      Roof Area Calculator

      True roof square footage and roofing squares from footprint and pitch.

      Roof Truss Calculator

      How many trusses you need at 16″ or 24″ spacing, and what they cost.

      Rafter Length Calculator

      Common rafter length, rafter count and cut angles from span, pitch and spacing.

      Roof Shingle Calculator

      Squares, bundles and underlayment rolls for your roof, with a cost range.

      Underlayment Calculator

      Rolls of synthetic underlayment or felt, including the low-slope double-coverage rule.